ELERO® wood adhesives (solid powder/liquid) are used in particleboard, medium density fiberboard (MDF), structural panels, plywood, oriented strand board (OSB) and laminated veneer lumber (LVL).
QUALITY STANDARD
Appearance: Reddish brown, uniform liquid without impurities
PH: 10~11.5
Solid content（%）: 50~55
Free formaldehyde（%）: ≤0.06~0.08
Hot pressing conditions（℃）: 120~250
PRESSING CONDITIONS
The pressing time would depend upon the press temperature, glue mix reactivity, wood density, veneer thickness and moisture content of the veneers. The temperature for good glue setting normally varies between 90 – 120°C. Pressure would depend upon the wood quality, being higher for hard wood species as compared to soft wood.
ACTIVE PERIOD
The active period is about 6 hours by using our hardner (CA100). Other modifiers and curing agents will be different.
AGING TIME
The maximum of aging time depends on the amount of glue applied, type of wood, temperature, relative humidity, and airflow speed (ventilation conditions and displacement). Under normal circumstances, pressure must have glue or sticky.
GLUE CONSUMPTION
The glue is spread to one surface. The veneer surface should be clean and free from dust and other contamination. The consumption of glue generally would be 140‐200g/m² per square meter.
Hotline
+8613760616261
Working Hours
Mon.~Fri.
Company Phone
+8613760616261
QQ Representative